ITMAM Finishing · Decor · Supply

Openings & envelope

Steel & Ironwork

Metalwork is where a house gets its lines. We fabricate structural steel, wrought iron, stainless and brass in our own workshop — staircases that cantilever, railings with no visible fixings, gates that shut the way an expensive gate should — and we finish them so the coast does not eat them.

We sourceWe manufactureWe install

Scope of works

What we actually do.

Everything below happens inside our business — no subcontracted links in the chain.

  1. 01

    Staircases

    Straight, spiral, helical and cantilevered stairs in steel with timber, stone or glass treads. Engineered, shop-fabricated, delivered in sections and welded on site.

  2. 02

    Balustrades & handrails

    Glass-and-steel, vertical bar, laser-cut panel and hot-forged wrought iron, with brass, oak or stainless handrails.

  3. 03

    Gates & entrances

    Sliding and swing gates, motorised with safety edges and intercom integration, in steel, aluminium composite or forged iron.

  4. 04

    Pergolas & canopies

    Steel and aluminium pergolas, entrance canopies, car ports and louvred roofs, engineered for wind load on exposed coastal sites.

  5. 05

    Structural steel

    Beams, columns, mezzanines and openings formed in existing structures, with drawings stamped by our structural engineer.

  6. 06

    Decorative metal

    Laser-cut and CNC-folded screens, brass inlays, patinated panels, room dividers and stone-and-metal furniture bases.

Specification

The numbers, before you ask.

Steel & Ironwork — technical specification
MaterialsMild steel · Stainless 304/316 · Aluminium · Brass · Forged iron
FinishesHot-dip galvanised · Powder coat · Zinc primer + PU · Patinated brass
Coastal spec316 stainless and hot-dip galvanising before coating
EngineeringLoad calculations and shop drawings on every structural item
WeldingMIG / TIG, ground and filled on all exposed work
Lead time3–7 weeks depending on engineering
Slatted metal gate at a villa entrance, made and hung by us

Selection

What we fabricate

  • Cantilevered stairSignature

    Treads carried off a hidden spine or wall stringer. The most demanding thing we build and the one that changes a hallway completely.

  • Glass-and-steel balustradeModern

    Minimal top rail, laminated glass, concealed base channel. Reads as almost nothing, which is the point.

  • Forged wrought ironClassic

    Hand-forged scrollwork and pickets for classical villas — traditional craft, executed properly rather than cast and bolted.

  • Louvred pergolaTerrace

    Fixed or motorised blades on an engineered frame, sized for real wind loads on a Sahel roof terrace.

  • Laser-cut screensDecorative

    Mashrabiya-inspired or contemporary geometric panels in steel, aluminium or brass, backlit or freestanding.

Gallery

Steel & Ironwork in place.

Every photograph on this page was taken on one of our sites during the work. Nothing here is a stock image or a render.

Granite stair with stainless balustrade and brass newel over dark marble
Granite stair with stainless balustrade and brass newel over dark marble
Central stainless handrail on the lobby stair
Central stainless handrail on the lobby stair
Stainless balustrade around the stair void on polished marble
Stainless balustrade around the stair void on polished marble

Where it goes

  • Internal & external staircases
  • Balcony & terrace balustrades
  • Entrance gates & fencing
  • Pergolas, canopies & car ports
  • Structural openings & mezzanines
  • Decorative screens & partitions
  • Pool and garden ironwork

Questions we get asked

Steel & Ironwork — questions we get asked

How do you stop steel rusting in Sahel?
Specification, not paint. Anything exposed within a few kilometres of the sea gets hot-dip galvanising before powder coating, or 316 stainless where the section allows. Fixings are stainless, welds are ground and re-protected, and drainage holes go in every hollow section so water cannot sit inside. Painting bare mild steel on the coast buys you about two seasons.
Can you build a cantilevered staircase in an existing house?
Often, but it depends entirely on what the treads are anchored into. A cantilever needs a wall or spine that can take a large moment, so we start with a structural survey and calculations. If the wall cannot take it we will show you a spine-beam version that looks similar and is honest about the physics.
Do you do wrought iron in the traditional style?
Yes — hand-forged, not cast. Scrolls, twists, collars and hammered texture done at the anvil. It costs more than bolted-together cast components and it is immediately recognisable as the real thing, particularly on gates and stair balustrades in classical villas.
Are your pergolas engineered for wind?
Every one. Coastal terraces and roof levels see wind loads that people badly underestimate, and an under-designed pergola is a genuine hazard. We calculate the frame, size the base plates and specify the fixings into real structure — never into screed or tile.

Written quotation

Tell us about the job. We reply with a written quotation.

Name and phone are enough to start. We call you back, ask the questions that matter, and you get an itemised quotation in writing — no figures guessed over the phone.

  • You pay the supplier directly, and the tax invoice is in your name.
  • Finishing, decoration and supply from one company.
  • Every photo on this site is our own work.

Or reach us directly

Please write your name.
Please write a phone number we can call.

We use your number only to answer this enquiry.

WhatsApp