Conversation & survey — A brick-and-concrete shell room with aluminium windows already fitted and a bare sand floor.

Openings & envelope

Windows, Doors & Glazing

The window is the most expensive mistake in an Egyptian villa. Get the thermal break, the glass spec and the drainage right and the house is quiet and cheap to cool. Get them wrong and you have condensation, whistling and a cooling bill nobody can explain. We fabricate and install, so the survey, the glass order and the seal are one responsibility.

Get a quotation WhatsApp

We sourceWe manufactureWe install

Scope of works

What we actually do.

Everything below happens inside our business — no subcontracted links in the chain.

Get a quote for windows & doors

01
Thermal-break aluminium
Polyamide thermal-break profiles in casement, tilt-and-turn, sliding and lift-and-slide configurations, powder-coated in any RAL or wood-effect finish.
02
Minimal-frame sliding systems
Slim sightline sliders and lift-and-slide doors with recessed tracks and near-invisible frames for sea and garden views.
03
uPVC systems
Multi-chamber uPVC with steel reinforcement — excellent thermal and acoustic performance where the aesthetic allows it.
04
Glass specification
Double-glazed units with argon fill, low-E coatings, solar-control and acoustic laminates, and toughened or laminated safety glass where it is required.
05
Frameless & structural glass
Frameless balustrades, glass partitions, shower screens, canopies and structural glass corners.
06
Entrance & security doors
Armoured entrance doors, pivot doors in timber or aluminium composite, and glazed pivot entrances with concealed closers.

Specification

The numbers, before you ask.

Windows & Doors — technical specification
Aluminium	Polyamide thermal break, marine-grade coating on coastal work
Glass	6-12-6 to 8-16-8 DGU, argon-filled, low-E, solar-control or acoustic
U-value	Down to ≈1.4 W/m²K on specified systems
Hardware	Multi-point locking, stainless coastal grade, concealed hinges
Sliding	Lift-and-slide up to large panel sizes, recessed flush track

Selection

Systems and where they belong

Thermal-break casement & tilt-turnVillas
The reliable default. Best seal, best security, easiest to service, and it takes a fly screen without looking added-on.
Lift-and-slideLarge openings
Heavy panels that lift off their seal to glide, then drop to compress it. Quiet, weathertight, and the right system for a 4-metre terrace opening.
Minimal sightline slidersSea views
When the client wants glass and not frame. Structurally demanding and worth specifying at the design stage.
uPVC multi-chamberValue & acoustics
Outstanding thermal and sound numbers for the money. We use it where the frame will be curtained or the elevation is secondary.
Frameless glassBalustrades & screens
Toughened laminated glass on channel or spigot fixings for terraces, stairs and pool edges.

Gallery

Windows & Doors in place.

Every photograph on this page was taken on one of our sites during the work. Nothing here is a stock image or a render.

Aluminium window installed, protective film still on the frame

Glazed internal door hung in its frame, bead and hinges set

Where it goes

Villa & apartment windows
Terrace & garden sliding doors
Frameless balustrades
Entrance & pivot doors
Glass partitions & shower screens
Roof lights & canopies
Chalet coastal glazing

Questions we get asked

Windows & Doors — questions we get asked

Aluminium or uPVC in Egypt?

Aluminium for anything architectural — large spans, slim sightlines, sliding systems and coastal exposure — provided it has a genuine polyamide thermal break. uPVC gives better insulation per pound and excellent acoustics, but the frames are chunkier and colour choice is narrower. In practice we specify thermal-break aluminium on the main elevations and uPVC where budget matters more than the sightline.

Is double glazing worth it here?

Yes, and mostly for cooling rather than heating. A low-E, solar-control double-glazed unit rejects a large share of the heat that single glazing lets straight in, which lowers the AC load all summer. On a sea-facing Sahel elevation it is the single highest-return upgrade in the envelope, and it kills road and neighbour noise as a side effect.

What fails first on coastal windows?

The hardware and the coating, not the glass. Standard steel fittings seize and standard powder coat blisters within a few kilometres of the sea. We use stainless coastal-grade hardware and seaside-class pretreatment, and we drain and vent the frames properly, because trapped water inside a profile is what destroys a window from the inside.

Can you replace windows in a finished apartment?

Yes. We survey, fabricate, then remove and replace opening by opening — usually one room per day — with the reveals made good and painted. We work around occupied homes regularly, including tower units in Alexandria and New Cairo with lift and access restrictions.

Usually specified with