Build & MEP

Electrical & Smart Home

Electrics are invisible until they are a problem. We design the circuits, chase and wire the first fix, build the boards to a schedule you can actually read, and light the rooms deliberately — then layer automation on top so the house does the obvious things by itself.

Get a quotation WhatsApp

We sourceWe manufactureWe install

Scope of works

What we actually do.

Everything below happens inside our business — no subcontracted links in the chain.

Get a quote for electrical & smart home

01
Design & load calculation
Circuit schedules, load balancing, cable sizing and earthing design produced as drawings, not decided on site by whoever is holding the chisel.
02
First & second fix
Conduit and chasing, fire-rated cable where required, back boxes set to a datum, then sockets, switches, plates and terminations after decoration.
03
Distribution boards & protection
Properly rated boards with RCBOs, surge protection, labelled circuits and an as-built schedule handed over on paper and PDF.
04
Architectural lighting
Layered lighting design — cove, linear, track, spot and feature — with dimming, scene control and consistent colour temperature. We do the calculations rather than dotting downlights on a plan.
05
Smart home & automation
Lighting scenes, motorised curtains and shutters, HVAC control, door entry, and app or panel control. KNX for large villas, wireless systems for retrofit.
06
Security, networking & AV
Structured cabling, Wi-Fi coverage design, CCTV, intercom, alarm, TV distribution and multi-room audio.

Specification

The numbers, before you ask.

Electrical & Smart Home — technical specification
Boards	RCBO per circuit, Type 2 SPD, labelled and schedule-documented
Cabling	Copper to calculated size; fire-rated where required
Earthing	Dedicated earth pit and equipotential bonding on villas
Lighting control	Phase-dim, 0-10 V or DALI; KNX on large projects
Network	Cat6/6a structured cabling to a central rack
Handover	As-built drawings, circuit schedule, test results, warranties

Cube wall lights throwing a star lattice across a rendered façade at night

Selection

How we scope it

Full villa electricalNew build / gut
Design through to certificate: boards, generator or UPS provision, external lighting, pool and pump circuits, and a labelled handover pack.
Apartment rewireRenovation
Replacing the aluminium wiring and undersized boards common in older Alexandria and Cairo buildings. This is a safety job first and a convenience one second.
Lighting design packageDesign-led
A lighting plan produced with the interior design — cove details, beam angles, colour temperature and scene programming.
Smart retrofitOccupied homes
Wireless lighting, curtains and climate control added without re-chasing walls. The practical route for a finished apartment.
Chalet & remote unitSahel
Surge protection, remote monitoring, leak sensors and away-mode automation for a home that is empty most of the year.

Gallery

Electrical & Smart Home in place.

Every photograph on this page was taken on one of our sites during the work. Nothing here is a stock image or a render.

ABB board recessed in the wall, breakers on the main switch

Where it goes

Villa & apartment installations
Full rewires
Architectural lighting
KNX & smart automation
CCTV, intercom & alarms
Structured networking & Wi-Fi
Pool, pump & garden circuits

Projects featuring electrical & smart home

Where we have used it.

El Moghra, Siwa — 2026

El Moghra

Turnkey build & finish · Desert lodge · Completed

View project

Questions we get asked

Electrical & Smart Home — questions we get asked

Do I need to rewire my apartment?

If it was wired before roughly the 1990s, or if you find aluminium conductors, undersized cable, no RCD protection or a board that has been extended repeatedly — yes, and it is a safety issue rather than an upgrade. We open the board, test, and give you a written finding. If a partial rewire is genuinely enough, we will tell you that instead of selling the full job.

What smart home system should I choose?

For a villa being built or gutted, KNX — it is wired, vendor-neutral and still serviceable in fifteen years. For a finished apartment, a good wireless ecosystem does ninety percent of what people actually use at a fraction of the disruption. The mistake is buying a closed proprietary system that dies with its manufacturer.

Can you do lighting design with my interior designer?

Yes, and it works far better that way. We take their ceiling and joinery drawings and produce a lighting layout with beam angles, cove dimensions and dimming zones, then flag where a detail will not physically house a fitting. Cove lighting in particular has to be coordinated before the gypsum goes up.

What protects a chalet that sits empty?

Surge protection at the board, a leak sensor with a motorised shut-off valve on the main, remote power monitoring and an away scene that shuts down non-essential circuits. Most out-of-season chalet damage in Sahel is water and surge, and both are cheap to defend against before they happen.

Usually specified with